Step By Step Guide - Classic Collection

Use the steps and photos below to help you use your WRAPfinery Classic Collection gift wrap kit.  We recommend having a look through the guide before you actually start to wrap.

Let's Get Wrapping

Lets get wrapping - step 1

Step 1 – Before you start, make sure you have everything you need close to hand:-

  • WRAPfinery Gift Wrap Kit
  • The gift to wrap
  • Scissors
  • Tape
  • Tin cans (or something to use as weights).

Step 2 – Place your gift on the gift wrap paper, and check the best angle to cover all of your gift.

This is were the tin cans come in handy – use weights to hold down the edges of the wrapping paper.

Step 3 – Cut off any excess paper, leaving about 5cm over-hanging at each end.

Step 4 – Take one end of the cut paper parallel to your gift and do a small fold in, to create about a 1cm overlap.

We'll show you how to get neat edging

Step 5 – Then position your gift so that the folded edge of the wrapping paper is aligned to the edge of the gift.

Step 6 – Take your double-sided tape and place a piece along the edge of the paper you’ve folded over.

Step 7 – Then wrap around your gift, pressing firmly along the line of the tape to secure your paper.

(Because the fold aligns with the edge of your gift it will be almost invisible).

Step 8 – Push the overhanging paper in, making sure it is no longer than the height of your gift – any excess should be trimmed off.

Hold the flap in place with one hand, and use your other hand to crease the paper.

It's all about the creases

Step 9 – Then take one side and push it in, keeping the paper tight and firmly creasing it.

Step 10 – Repeat at the opposite side so that you are left with a triangle shape.

Step 11 – Bring the triangle up, and again crease it along the fold at the bottom for neatness.

Step 12 – Fold the top of the triangle back so that it aligns with the two side folds, and crease it.

Expertly folded ends

Step 13 – Now let the paper drop back to your flat surface and fold the triangle in on itself and crease again.

Step 14 – Put a piece of double-sided tape on each of the 3 sides.

Step 15 – Remove the protective layer and secure.

Step 16 – Now repeat at the other end and turn your gift the right way up.

A quick and easy way to apply ribbon

Step 17 – Wrap the wide ribbon around your gift and cut so that it slightly overlaps.

Step 18 – Fold over the cut edge for neatness and secure with a piece of double-sided tape.

Step 19 – Repeat this for the shorter side of your gift to form a cross.

Step 20 – Your bow is a pull-bow for maximum effect, but minimum effort.

Find the pointed end of the pull bow and separate to reveal two narrow ribbons inside.

Tying the perfect bow

Step 21 – Slowly pull the two narrow ribbons to create your bow.

Step 22 – Tie the two narrow ribbons in a double knot to secure the bow.

Step 23 – You can use the excess narrow ribbon to tie the bow to your gift.

Step 24 – Curl the excess ribbon using a pair of scissor for a decorative finish.

You've finished - expertly wrapped by you!

Step 25 – Use the excess ribbon you’ve curled and pass it through the hole in your gift tag to attach it to your finished gift.

Step 26 – That’s it you’re done!  A beautiful wrapped gift fit for any occasion.